FL State Certified Mechanical Contractor #CMC1250577

Commercial Rooftop Units (RTUs) for the Upper Florida Keys

Degree of Comfort LLC engineers, installs, and services commercial rooftop package units with insulated curb adaptation, coastal corrosion protection, and calibrated airflow balancing across Key Largo, Ocean Reef, Tavernier, and Islamorada.

  • Unlimited tonnage mechanical license
  • Authorized Carrier Dealer
  • Mon–Fri, 8 AM–5 PM
Two 5-ton Carrier WeatherMaker commercial rooftop package units installed by Degree of Comfort LLC serving a 4,000 sq ft commercial warehouse with PVC condensate drains supported on roof pipe stands
Completed Commercial Mechanical Work: Two 5-ton Carrier WeatherMaker® commercial rooftop package units serving a 4,000 sq ft commercial warehouse, with PVC condensate drains supported neatly on roof pipe stands—demonstrating the commercial capability Degree of Comfort LLC (#CMC1250577) brings to Upper Keys facilities.
Mechanical Craftsmanship

Field-Proven Commercial Installation and Commissioning

Every rooftop and commercial mechanical project shown below is completed work by Degree of Comfort LLC (FL License #CMC1250577), demonstrating the structural curb work, refrigerant brazing, and airflow verification we bring to Upper Keys commercial facilities.

Co-founder Alexandra Beegle installing insulated sheet-metal ductwork to a commercial roof curb in full PPE

Insulated Sheet-Metal Curb Ductwork Installation

Co-founder Alexandra Beegle installing insulated sheet-metal ductwork to a commercial roof curb in full PPE for an airtight, thermally insulated transition beneath the package unit.

Co-founder Jason Beegle brazing multi-unit commercial Mitsubishi City Multi copper refrigerant piping

Commercial Refrigerant Piping and Brazing

Co-founder Jason Beegle brazing multi-unit commercial Mitsubishi City Multi copper refrigerant piping. Degree of Comfort LLC is a Certified Mitsubishi City Multi Installer and Servicer for commercial VRF and rooftop mechanical scopes.

Co-founder Jason Beegle measuring commercial supply diffuser CFM with a calibrated airflow capture hood

Calibrated Airflow Balancing

Co-founder Jason Beegle measuring commercial supply diffuser CFM with a calibrated airflow capture hood to verify air distribution and static balance at commissioning.

Coastal Engineering Standards

Commercial Rooftop Unit Coastal Installation Standards

Marine exposure, high winds, and continuous humidity demand disciplined rooftop mechanical detailing. Below are the standards we specify for commercial rooftop units across Monroe County.

Installation Standard Field Specification Coastal Facility Benefit
Roof Curb Insulation and Sealing Insulated commercial sheet-metal curb adapters fastened and weather-sealed to the roof deck. Prevents conditioned-air bypass, roof-deck condensation, and water intrusion during heavy tropical rain.
Pre-Applied Modine Insitu® or EpoxSil™ Corrosion Coating Optional coastal protection including Modine Insitu® (adds up to 1 week lead time) or EpoxSil™ from Bethel Products. Protects fin-and-tube heat exchangers and cabinet surfaces against corrosive Upper Keys salt-air exposure.
Elevated Roof-Safe Condensate Pipe Supports PVC condensate drain lines routed and supported neatly on dedicated roof pipe stands. Keeps condensate piping off the roof membrane, prevents sagging traps, and protects roof waterproofing.
Hurricane Wind-Load Tie-Downs Engineered mechanical tie-down strapping and curb attachment compliant with Monroe County wind-load codes. Secures rooftop package equipment against coastal storm uplift and meets local permitting inspections.
Calibrated CFM Balancing Supply diffuser airflow measured with a calibrated airflow capture hood during startup. Confirms delivered CFM matches design airflow across every zone, including commercial fabric ductwork distributions.

Pair RTUs With Commercial Fabric Ductwork

For open-ceiling commercial warehouses and large-span spaces, our rooftop units pair cleanly with commercial fabric ductwork for uniform, draft-free air distribution.

Explore Commercial Fabric Ductwork

Explore Completed Commercial Projects

Review documented commercial and residential mechanical installations across our completed projects portfolio and commercial HVAC services.

View Completed Projects
Commercial RTU FAQ

Questions About Commercial Rooftop Units in the Upper Keys

Why does commercial rooftop unit installation require a Mechanical Contractor (#CMC1250577)?

A Florida State Certified Mechanical Contractor (#CMC1250577) is authorized for unlimited tonnage commercial equipment, structural roof curb adaptation, hurricane wind-load tie-downs, and commercial mechanical permitting across Key Largo, Ocean Reef, Tavernier, and Islamorada.

How do you protect commercial rooftop units from Upper Keys salt-air corrosion?

We offer pre-applied Modine Insitu corrosion coating on commercial rooftop coils and cabinets to defend against marine salt spray. Selecting the factory pre-applied Modine Insitu option adds up to 1 week of equipment lead time before rigging and installation.

Do you perform commercial airflow balancing after installing a rooftop unit?

Yes. Every commercial rooftop installation includes calibrated airflow capture hood CFM measurements at supply diffusers so airflow matches design specifications across the facility.

Schedule a Commercial Rooftop Unit Consultation

Request a commercial RTU assessment or replacement quote across Key Largo, Ocean Reef, Tavernier, or Islamorada.

Request Service or call 305-209-9507