Verified Mechanical Portfolio · #CMC1250577

Completed Residential and Commercial HVAC Projects

Real field photography from Upper Florida Keys residential installations and completed commercial mechanical projects by Degree of Comfort LLC (#CMC1250577)—bringing certified commercial craftsmanship to Ocean Reef, Key Largo, Tavernier, and Islamorada.

  • FL License #CMC1250577
  • Authorized Carrier Dealer
  • Certified Mitsubishi City Multi Installer and Servicer
Spotlight 1 · Upper Florida Keys

Elevated Carrier Infinity® 26VNA1 Trio With Modine Insitu® Coating

Three variable-speed R-454B condensers pre-coated for salt-air longevity and mounted on an elevated aluminum rack.

Three Carrier Infinity 26VNA1 variable-speed condensers pre-coated with Modine Insitu corrosion coating on an elevated aluminum rack in the Upper Florida Keys
Upper Keys Coastal Spec

Pre-Coated Protection Before the Units Reach the Rack

For this Upper Florida Keys residence, three Carrier Infinity® 26VNA1 variable-speed R-454B condensers were pre-coated with Modine Insitu® spray-applied corrosion coating prior to installation and set on an elevated aluminum rack.

Read the full technical breakdown in our Coastal AC Corrosion Protection Guide covering Modine Insitu® and EpoxSil™.

Spotlight 2 · Ocean Reef

Roof-Deck Crane Installation of Three Carrier Infinity® Systems

Precision rigging onto an elevated Ocean Reef estate roof deck while protecting pavers and landscaping.

Crane lifting Carrier Infinity HVAC equipment onto an elevated estate roof deck in Ocean Reef with ground protection

Ocean Reef Elevated Roof-Deck Lift

Customer-approved crane installation placing three Carrier Infinity® systems onto an elevated Ocean Reef estate roof deck while protecting finished pavers and surrounding landscaping.

Spotlight 3 · Commercial Mechanical Project

4,000 Sq Ft Warehouse: Twin 5-Ton Carrier WeatherMaker® RTUs and Commercial Fabric Ductwork

Completed commercial mechanical project by Degree of Comfort LLC (#CMC1250577), demonstrating the commercial rooftop and air-dispersion capability we bring to Upper Keys properties.

Two 5-ton Carrier WeatherMaker rooftop package units with condensate piping on roof pipe supports

Twin 5-Ton Carrier WeatherMaker® Rooftop Package Units

Two 5-ton Carrier WeatherMaker® rooftop package units installed with properly pitched condensate piping supported on roof pipe supports.

Custom sheet-metal vertical drops feeding twin commercial fabric air-dispersion ductwork beneath a concrete double-tee warehouse ceiling

Custom Sheet-Metal Drops and Commercial Fabric Ductwork

Custom sheet-metal vertical drops feeding twin commercial fabric air-dispersion runs suspended cleanly beneath a concrete double-tee ceiling for uniform 4,000 sq ft warehouse airflow.

Spotlight 4 · Commercial Buildout

Carrier Ductless Ceiling Cassette With Motorized Fresh-Air Damper and Custom Fiberglass Ductwork

Completed commercial mechanical project by Degree of Comfort LLC (#CMC1250577), showcasing commercial fresh-air integration and mastic-sealed custom ductwork.

Recessed Carrier commercial ceiling cassette tied into rigid sheet-metal fresh-air ductwork with a motorized fresh-air damper

Recessed Carrier Cassette and Motorized Fresh-Air Damper

Recessed Carrier commercial ceiling cassette tied into rigid sheet-metal fresh-air ductwork with a motorized fresh-air damper for controlled outdoor-air ventilation.

Mastic-sealed fiberglass duct board trunk lines and insulated flex runouts fabricated on a commercial buildout

Mastic-Sealed Fiberglass Duct Board and Insulated Flex

Custom-fabricated, mastic-sealed fiberglass duct board trunks paired with cleanly supported insulated flex runouts for airtight ductwork performance.

Spotlight 5 · Hands-On Mechanical Craftsmanship

Insulated Roof-Curb Ductwork, Mitsubishi City Multi Copper Brazing, and Airflow Balancing

Completed commercial mechanical project by Degree of Comfort LLC (#CMC1250577)—owner-led execution from installing insulated sheet-metal ductwork at the roof curb to final airflow verification.

Alexandra Beegle installing insulated sheet-metal ductwork to a commercial roof curb

Insulated Sheet-Metal Curb Ductwork

Alexandra Beegle installing insulated sheet-metal ductwork to a commercial roof curb for an airtight, thermally insulated transition.

Jason Beegle brazing commercial Mitsubishi City Multi copper refrigerant headers

Mitsubishi City Multi Copper Brazing

Jason Beegle brazing commercial Mitsubishi City Multi copper headers as a Certified Mitsubishi City Multi Installer and Servicer.

Jason Beegle verifying supply CFM with a calibrated airflow capture hood

Airflow Capture Hood Balancing

Jason Beegle verifying supply CFM at the register with a calibrated airflow capture hood before project sign-off.

Projects FAQ

Questions About Our Residential and Commercial Work

Are all commercial projects shown on this page located in the Florida Keys?

No. While our residential Carrier Infinity® and Ocean Reef crane projects are in the Upper Florida Keys, the commercial warehouse, ceiling cassette, roof-curb ductwork, copper brazing, and airflow balancing photos document completed commercial mechanical projects by Degree of Comfort LLC (#CMC1250577) demonstrating the commercial capability we bring to Upper Keys properties.

What does Florida State Certified Mechanical Contractor (#CMC1250577) authorize?

License #CMC1250577 is Florida’s highest mechanical licensing classification, authorizing Degree of Comfort LLC to engineer, install, and service residential systems, commercial rooftop units, custom sheet metal and fiberglass ductwork, VRF refrigerant piping, and airflow balancing.

Do you coordinate crane lifts for elevated Ocean Reef and Upper Keys properties?

Yes. For elevated roof decks and multi-story coastal estates in Ocean Reef, Key Largo, Tavernier, and Islamorada, we coordinate crane lifts with ground protection to safeguard pavers and landscaping.

Have an Upper Keys Residential or Commercial Project?

Request an evaluation Monday through Friday, 8 AM to 5 PM, directly with our Key Largo team.

Request Project Consultation or call 305-209-9507